LaserPeak will exhibit at EuroBLECH 2026, taking stand 22-D48 in Hall 22 at Messe Hannover from 10 to 13 November 2026. The stand will bring together the full European product range for the first time, including the new LP-F12000 12 kW machine and the Φ320 configuration of the LP-T Series tube cutter.
The live demonstration theme is "one job, two platforms": a 6 mm mild steel tube part will be cut on the LP-T Series, transferred to the LP-W Series welding cell, and the finished assembly will be shipped to the customer before the show closes. Visitors can also see the LP-A series automated loading and unloading station feeding an LP-F3000 in a continuous run, with the LP-Plus control software open for anyone who wants to program a part on the floor.
A dedicated process corner will cover the two questions our customers ask most often: how to hold a clean edge on aluminium sheet, and how to keep dross off 6 mm carbon steel tube. Application engineers will run live trials on customer parts brought to the stand, and the LP-W welding cell will be configured for both MAG and laser-with-wire setups on 1 to 6 mm stainless and mild steel.
Commercial teams from LaserPeak and its European distributor network will be on the stand throughout the show, with live quotations for machines, spare parts bundles and service agreements. The LP-F1500 and LP-F3000 models will be shown as working units alongside a static LP-F6000 Heavy-Duty Fiber Series machine, and the full spare parts catalogue will be available to take away in print.
Appointments can be arranged in advance through the LaserPeak sales team or any of the European offices, and the Stuttgart service centre will run drop-in sessions on service contracts and operator training. Anyone who cannot travel to Hannover can request a video walkthrough of the stand and a sample cut on their own component.
评论
暂无评论，来发表第一条评论吧。
相关阅读
A new Φ320 mm clamping and cutting configuration extends the LP-T Series tube range by roughly 40%, covering 1 to 10 mm wall thickness for structural, piping and heavy shaft work. Orders are being accepted now, with deliveries from August 2026.
The new LP-F12000 brings a 12 kW fiber source and a 3500 × 1500 mm working area to heavy plate and structural steel work, cutting 6 mm mild steel at up to 8 m/min. The machine is open for order from November 2026, with first installations from the first quarter of 2027.
Gas selection, focus position and pierce strategy decide whether a 6 mm carbon steel tube cut is production-ready or full of rework. This note lists the settings we run on LP-T Series machines and the three defects that cause most complaints.
A new dedicated centre in Stuttgart, Germany, consolidates European logistics and field support, holding more than 4,500 line items of wear parts, optics and consumables. Same-day dispatch is offered for Germany, France, Italy, Spain, Poland and the Benelux region.
Aluminium reflects the beam, conducts heat quickly and forms a hard, spiky dross. Surface preparation, gas pressure and nozzle geometry decide whether the cut edge is clean or coated in spatter.