Describe your job, get a tailored proposal
Tell us the material, thickness and industry. The page below is regenerated around your requirement — with the machines and the process advice that match it.
Suggested approach
- 01Step 01
Confirm the material
Send us the exact grade and thickness — cutting data for S355, 304 stainless and 6061 aluminium differ enough that the machine has to be matched to the material, not to the nominal thickness.
- 02Step 02
Trial-cut before you commit
Every application starts with a cutting trial on your own material so cycle time, dross and edge quality are measured rather than quoted.
- 03Step 03
Set up the process, not just the machine
Gas selection, focus position, pierce strategy and nozzle geometry decide the edge — they are written into the machine before it ships.
- 04Step 04
Plan for the real tonnage
Load and unload time often decides the answer. We size the cell around your monthly volume and shift pattern, not around the largest part.
Preliminary process advice based on the requirement you described. Final parameters are confirmed by a trial cut on your material before production.
Recommended machines
Machines matched to the requirement you described.
Ein 3 kW Faserlaser im Format 3000×1500 mm, der LP-F1503-3kW schneidet 3 mm dickes Kohlenstoffstahlblech mit etwa 12 m/min und erreicht bei 10 mm dickem Stahlblech die Nennleistung. Die pneumatische Palettenwechselvorrichtung, die automatische Düsesteuerung und das kompakte Gehäuse machen es zu einer robusten Produktionszelle für kleine und mittlere Jobshops.
- Power
- 3 kW
- Cutting area
- 3000×1500 mm
- Accuracy
- ±0,02 mm
Eine 3 kW Laserschweißzelle mit einem 2000×1000 mm Schweißpodest für Blech- und Rohrbauteile. Sie schweißt 1,5–3 mm Überlappungen durch Lochschweißen, verarbeitet 0,8–4 mm Edelstahl- und galvanisierte Bleche bis zu 2 mm Dicke und ersetzt TIG-Stationen durch einen schnelleren und wiederholbareren Prozess.
- Power
- 3 kW
- Cutting area
- 2000×1000 mm Schweißvorrichtung, erweiterbar auf 3000×1500 mm
- Accuracy
- ±0,1 mm
Die 1,5 kW-Version der LP-F1500-Plattform für dünne Bleche, präzise Blanks und Kleinbauteile in großen Mengen. Sie schneidet dünnes Edelstahlblech mit mehr als 30 m/min, minimiert Wärmebeeinflussungszonen bei empfindlichen Werkstücken und verbraucht deutlich weniger Strom als vergleichbare Kohlendioxid-Anlagen.
- Power
- 1.5 kW
- Cutting area
- 3000×1500 mm
- Accuracy
- ±0,02 mm
A 10 kW laser on the 4000×2000 mm bed for large-format panels in one piece. It cuts 6 mm carbon steel at about 9 m/min and handles 20 mm plate, giving structural, vehicle-body and enclosure manufacturers a single machine for full-width blanks with no part splitting.
- Power
- 10 kW
- Cutting area
- 4000×2000 mm
- Accuracy
- ±0.02 mm
The LP-A2000 automates sheet handling around LaserPeak fibre cutting machines, with interchangeable lifting tables, automatic pallet exchange, sheet following and robot loading arms. Unattended hours increase while operators move from handling heavy plate to programming and inspection.
- Cutting area
- Serves 1500×750 to 6000×2500 mm sheet platforms
- Accuracy
- ±0.05 mm sheet positioning
A 30 kW laser on the 6000×2500 mm platform for the thickest production plate. It cuts 25 mm carbon steel at about 2.5 m/min and 30 mm at roughly 1.5 m/min, letting fabricators consolidate large-plate work that previously went to waterjet or multiple oxy-fuel stations.
- Power
- 30 kW
- Cutting area
- 6000×2500 mm
- Accuracy
- ±0.02 mm
Send the requirement to an application engineer
Your inquiry carries the requirement text, so the engineer replying already knows the material and the thickness.