Describe your job, get a tailored proposal
Tell us the material, thickness and industry. The page below is regenerated around your requirement — with the machines and the process advice that match it.
Process Advice for 3mm Stainless Sheet
- 01Step 01
Check Material and Thickness Fit
Confirm your 3mm stainless sheet is matched to a suitable laser system from our published range, such as the LP-F3015-6kW, LP-F4020-4kW, LP-W2000-3kW, or LP-F1503-3kW.
- 02Step 02
Set Cutting Parameters and Gas
Select cutting parameters and assist gas according to the parameters available in the site content for your chosen laser system; do not use values outside the published specifications.
- 03Step 03
Plan Fixturing and Support
Set up fixturing and support for the 3mm stainless sheet based only on the guidance available in the site content for your selected system.
- 04Step 04
Validate Before Production
Run a validation check against the published parameters for your chosen laser system before starting full production on the 3mm stainless sheet.
Preliminary process advice based on the requirement you described. Final parameters are confirmed by a trial cut on your material before production.
Fiber laser for 3mm stainless sheet
Choose from the LP-F3015-6kW, LP-F4020-4kW, or LP-F1503-3kW fiber laser models for 3mm stainless sheet work.
A 3 kW fibre laser in a 3000×1500 mm format, the LP-F1503-3kW cuts 3 mm carbon steel at about 12 m/min and reaches 10 mm mild steel at rated power. Pneumatic pallet exchange, automatic nozzle control and a compact footprint make it a strong production cell for small and mid-size job shops.
- Power
- 3 kW
- Cutting area
- 3000×1500 mm
- Accuracy
- ±0.02 mm
The 1.5 kW version of the LP-F1500 platform for thin sheet, precision blanks and high-volume small parts. It cuts thin stainless at more than 30 m/min, minimizes heat-affected zones on delicate workpieces and draws considerably less power than comparable carbon dioxide installations.
- Power
- 1.5 kW
- Cutting area
- 3000×1500 mm
- Accuracy
- ±0.02 mm
The 40 kW flagship with an 8000×2500 mm bed, cutting 30 mm carbon steel in one pass and handling the largest structural blanks in the LaserPeak range. It targets shipbuilding, defence platforms and heavy equipment where very thick plate is cut as single pieces.
- Power
- 40 kW
- Cutting area
- 8000×2500 mm
- Accuracy
- ±0.02 mm
A 30 kW laser on the 6000×2500 mm platform for the thickest production plate. It cuts 25 mm carbon steel at about 2.5 m/min and 30 mm at roughly 1.5 m/min, letting fabricators consolidate large-plate work that previously went to waterjet or multiple oxy-fuel stations.
- Power
- 30 kW
- Cutting area
- 6000×2500 mm
- Accuracy
- ±0.02 mm
The LP-A2000 automates sheet handling around LaserPeak fibre cutting machines, with interchangeable lifting tables, automatic pallet exchange, sheet following and robot loading arms. Unattended hours increase while operators move from handling heavy plate to programming and inspection.
- Cutting area
- Serves 1500×750 to 6000×2500 mm sheet platforms
- Accuracy
- ±0.05 mm sheet positioning
A 10 kW laser on the 4000×2000 mm bed for large-format panels in one piece. It cuts 6 mm carbon steel at about 9 m/min and handles 20 mm plate, giving structural, vehicle-body and enclosure manufacturers a single machine for full-width blanks with no part splitting.
- Power
- 10 kW
- Cutting area
- 4000×2000 mm
- Accuracy
- ±0.02 mm
Send the requirement to an application engineer
Your inquiry carries the requirement text, so the engineer replying already knows the material and the thickness.