技术参数
| 型号 | LP-A2000 Automated Loader |
|---|---|
| 切割幅面 | Serves 1500×750 to 6000×2500 mm sheet platforms |
| 最大板材厚度 | 0.5–30 mm depending on platform and gripper configuration |
| 重复定位精度 | ±0.05 mm sheet positioning |
| 最大定位速度 | 18 m/min transfer traverse |
适用材料
- Steel Sheet & PlateAutomatic stacking and destacking for 1–30 mm mild and stainless plate
- Aluminium SheetNon-marking grip handling for 5052 and 6061 panels
- Galvanized Coil & SheetLoose sheet handling without edge damage or zinc flaking
- Heavy Plate BlanksForklift-free transfer of 500 kg plate packs with automatic centre finding
核心能力
Table length is matched to the material mix, so narrow blanks and wide panels both load and unload correctly without manual intervention.
The loader tracks the sheet as it is cut, removing finished parts from the bed and presenting new stock, so the laser rarely waits for material.
Non-marking grippers, automatic height sensing and laser-safe collision protection handle 30 mm plate up to 500 kg without scratching the workpiece.
OPC UA, Siemens S7 and standard robot I/O let the loader work with the machine control, an upstream line or a FANUC or KUKA arm, and report status to the plant MES.
获取机型建议与报价
Send the model with your inquiry — our engineers reply with cutting parameters, cycle time and delivery.
相关案例
The 40 kW flagship with an 8000×2500 mm bed, cutting 30 mm carbon steel in one pass and handling the largest structural blanks in the LaserPeak range. It targets shipbuilding, defence platforms and heavy equipment where very thick plate is cut as single pieces.
A 10 kW laser on the 4000×2000 mm bed for large-format panels in one piece. It cuts 6 mm carbon steel at about 9 m/min and handles 20 mm plate, giving structural, vehicle-body and enclosure manufacturers a single machine for full-width blanks with no part splitting.
The 1.5 kW version of the LP-F1500 platform for thin sheet, precision blanks and high-volume small parts. It cuts thin stainless at more than 30 m/min, minimizes heat-affected zones on delicate workpieces and draws considerably less power than comparable carbon dioxide installations.
A 6 kW workhorse in a 3000×1500 mm bed, cutting 3 mm cold-rolled steel at about 30 m/min and mild steel up to 16 mm. This is the volume-production choice for automotive brackets and agricultural panels where a single shift must clear several tonnes of sheet.
The 20 kW LP-F6025 cuts 20 mm carbon steel and works across a 6000×2500 mm bed for heavy structural plate. Built for shipbuilding, defence and large machinery, it replaces oxy-fuel lines with a cleaner, faster and far more precise process.