技术参数
| 型号 | LP-F8025-40kW |
|---|---|
| 激光功率 | 40 kW |
| 切割幅面 | 8000×2500 mm |
| 最大板材厚度 | 40 mm carbon steel / 30 mm stainless steel / 25 mm aluminium |
| 重复定位精度 | ±0.02 mm |
| 最大定位速度 | 100 m/min |
适用材料
- Carbon Steel3–40 mm with 30 mm cut in a single pass
- Stainless Steel 304 / 3160.5–30 mm with nitrogen assist for bright, weld-ready edges
- Aluminium 5052 / 60611–25 mm with stable cutting on very thick sections
- Galvanized SteelUp to 16 mm with a narrow kerf and limited coating damage
核心能力
The largest configuration in the range handles eight-metre blanks and 40 mm plate, letting fabricators quote whole structures from a single sheet.
At 40 kW, 30 mm carbon steel is cut at roughly 1.2 m/min with a narrow heat-affected zone and an edge ready for welding with minimal preparation.
A heavy welded base, long-bed support rollers and high-rigidity drives hold ±0.02 mm repeatability from the first metre to the last of the working area.
The frame is prepared for pallet exchange, sheet following and robotic handling, so the machine can run unattended through multi-shift production.
获取机型建议与报价
Send the model with your inquiry — our engineers reply with cutting parameters, cycle time and delivery.
相关案例
A 10 kW laser on the 4000×2000 mm bed for large-format panels in one piece. It cuts 6 mm carbon steel at about 9 m/min and handles 20 mm plate, giving structural, vehicle-body and enclosure manufacturers a single machine for full-width blanks with no part splitting.
The 20 kW LP-F6025 cuts 20 mm carbon steel and works across a 6000×2500 mm bed for heavy structural plate. Built for shipbuilding, defence and large machinery, it replaces oxy-fuel lines with a cleaner, faster and far more precise process.
A 30 kW laser on the 6000×2500 mm platform for the thickest production plate. It cuts 25 mm carbon steel at about 2.5 m/min and 30 mm at roughly 1.5 m/min, letting fabricators consolidate large-plate work that previously went to waterjet or multiple oxy-fuel stations.
The 12 kW LP-F3015 is built for heavy-gauge throughput: roughly 8 m/min on 6 mm carbon steel and 5 m/min on 10 mm, with 20 mm capacity at full power. It serves structural, agricultural and defence fabricators who cut thick plate without oxy-fuel consumables.
The 4 kW LP-F4020 brings a 4000×2000 mm bed to shops that cut mostly thin and medium sheet. It cuts 3 mm carbon steel at about 15 m/min and 6 mm at roughly 7 m/min, with lower operating cost and simpler maintenance than higher-power installations.