Technical specification
| Model | LP-F4020-4kW |
|---|---|
| Laser power | 4 kW |
| Cutting area | 4000×2000 mm |
| Max. sheet thickness | 16 mm carbon steel / 12 mm stainless steel / 10 mm aluminium |
| Repeat positioning accuracy | ±0.02 mm |
| Max. positioning speed | 120 m/min |
Applicable materials
- Carbon Steel1–16 mm, approximately 15 m/min on 3 mm and 7 m/min on 6 mm sheet
- Stainless Steel 304 / 3160.5–12 mm with nitrogen assist for a clean cut face
- Aluminium 5052 / 60611–10 mm with low dross and flat, undistorted edges
- Galvanized SheetUp to 5 mm with minimal coating burn-back
Key capabilities
The 4 kW source covers the sheet thickness most fabricators actually cut, with lower electricity use, less chiller load and cheaper gas consumption than 10 kW installations.
Two 4000×2000 mm tables swap automatically, and a compact 1500×750 mm table can be fitted for small blanks to keep the whole bed productive.
The head measures material thickness and position, then sets cut height and nozzle distance without operator input, keeping geometry consistent across shifts.
Standard OPC UA and network integration let the machine report status and accept nests from the shop's existing nesting software or MES.
Machine video
Get machine recommendation and pricing
Send the model with your inquiry — our engineers reply with cutting parameters, cycle time and delivery.
相关案例
A 6 kW workhorse in a 3000×1500 mm bed, cutting 3 mm cold-rolled steel at about 30 m/min and mild steel up to 16 mm. This is the volume-production choice for automotive brackets and agricultural panels where a single shift must clear several tonnes of sheet.
A 3 kW fibre laser in a 3000×1500 mm format, the LP-F1503-3kW cuts 3 mm carbon steel at about 12 m/min and reaches 10 mm mild steel at rated power. Pneumatic pallet exchange, automatic nozzle control and a compact footprint make it a strong production cell for small and mid-size job shops.
A 10 kW laser on the 4000×2000 mm bed for large-format panels in one piece. It cuts 6 mm carbon steel at about 9 m/min and handles 20 mm plate, giving structural, vehicle-body and enclosure manufacturers a single machine for full-width blanks with no part splitting.
The 40 kW flagship with an 8000×2500 mm bed, cutting 30 mm carbon steel in one pass and handling the largest structural blanks in the LaserPeak range. It targets shipbuilding, defence platforms and heavy equipment where very thick plate is cut as single pieces.
The 20 kW LP-F6025 cuts 20 mm carbon steel and works across a 6000×2500 mm bed for heavy structural plate. Built for shipbuilding, defence and large machinery, it replaces oxy-fuel lines with a cleaner, faster and far more precise process.