Technical specification
| Model | LP-W2000-3kW |
|---|---|
| Laser power | 3 kW |
| Cutting area | 2000×1000 mm welding fixture, expandable to 3000×1500 mm |
| Max. sheet thickness | 0.8–4 mm stainless steel / 2 mm galvanized sheet / 1.5–3 mm lap joint |
| Repeat positioning accuracy | ±0.1 mm |
| Max. positioning speed | 8 m/min seam travel speed |
Applicable materials
- Stainless Steel 304 / 3160.8–4 mm with narrow, low-porosity seams and minimal heat input
- Galvanized SheetUp to 2 mm with controlled zinc vaporisation and little coating damage
- Carbon Steel1.5–4 mm for butt and fillet welds with low spatter
- Aluminium 5052 / 60611.5–3 mm with controlled keyhole and reduced porosity
- Copper / BrassThin gauge joining with dedicated focus and shielding gas settings
Key capabilities
The 3 kW source switches between keyhole welding for thicker sections and conduction welding for thin sheet, giving one cell the flexibility of several TIG stations.
Wobble head movement widens the bead for fillet welds, and double-wire feed raises deposition rate on thicker joints, both available from the same head.
Capacitive contact and non-contact tracking follow the joint as the fixture moves, correcting path deviations and holding consistent penetration on formed parts.
Fixture presets are stored for each part family, so operators switch from one assembly to another in minutes without re-teaching the welding path.
Machine video
Get machine recommendation and pricing
Send the model with your inquiry — our engineers reply with cutting parameters, cycle time and delivery.
相关案例
A 3 kW laser welding cell with a 2000×1000 mm fixture for sheet and tube assemblies. It keyhole-welds 1.5–3 mm lap joints, handles 0.8–4 mm stainless and galvanized sheet up to 2 mm, and replaces TIG stations with a faster, more repeatable process.
一款6 kW的高效设备，配备3000×1500 mm的工作台，可切割约30 m/min的3 mm冷轧钢和高达16 mm的低碳钢。这是汽车支架和农业面板批量生产的首选，单班次可处理数吨板材。
A 30 kW laser on the 6000×2500 mm platform for the thickest production plate. It cuts 25 mm carbon steel at about 2.5 m/min and 30 mm at roughly 1.5 m/min, letting fabricators consolidate large-plate work that previously went to waterjet or multiple oxy-fuel stations.
A 3 kW fibre laser in a 3000×1500 mm format, the LP-F1503-3kW cuts 3 mm carbon steel at about 12 m/min and reaches 10 mm mild steel at rated power. Pneumatic pallet exchange, automatic nozzle control and a compact footprint make it a strong production cell for small and mid-size job shops.
A 6 kW workhorse in a 3000×1500 mm bed, cutting 3 mm cold-rolled steel at about 30 m/min and mild steel up to 16 mm. This is the volume-production choice for automotive brackets and agricultural panels where a single shift must clear several tonnes of sheet.