Technical specification
| Model | LP-W2000-3kW |
|---|---|
| Laser power | 3 kW |
| Cutting area | 2000×1000 mm welding fixture, expandable to 3000×1500 mm |
| Max. sheet thickness | 0.8–4 mm stainless steel / 2 mm galvanized sheet / 1.5–3 mm lap joint |
| Repeat positioning accuracy | ±0.1 mm |
| Max. positioning speed | 8 m/min seam travel speed |
Applicable materials
- Stainless Steel 304 / 3160.8–4 mm with narrow, low-porosity seams and minimal heat input
- Galvanized SheetUp to 2 mm with controlled zinc vaporisation and little coating damage
- Carbon Steel1.5–4 mm for butt and fillet welds with low spatter
- Aluminium 5052 / 60611.5–3 mm with controlled keyhole and reduced porosity
- Copper / BrassThin gauge joining with dedicated focus and shielding gas settings
Key capabilities
The 3 kW source switches between keyhole welding for thicker sections and conduction welding for thin sheet, giving one cell the flexibility of several TIG stations.
Wobble head movement widens the bead for fillet welds, and double-wire feed raises deposition rate on thicker joints, both available from the same head.
Capacitive contact and non-contact tracking follow the joint as the fixture moves, correcting path deviations and holding consistent penetration on formed parts.
Fixture presets are stored for each part family, so operators switch from one assembly to another in minutes without re-teaching the welding path.
Machine video
Get machine recommendation and pricing
Send the model with your inquiry — our engineers reply with cutting parameters, cycle time and delivery.
相关案例
A 6 kW workhorse in a 3000×1500 mm bed, cutting 3 mm cold-rolled steel at about 30 m/min and mild steel up to 16 mm. This is the volume-production choice for automotive brackets and agricultural panels where a single shift must clear several tonnes of sheet.
A 3 kW fibre laser in a 3000×1500 mm format, the LP-F1503-3kW cuts 3 mm carbon steel at about 12 m/min and reaches 10 mm mild steel at rated power. Pneumatic pallet exchange, automatic nozzle control and a compact footprint make it a strong production cell for small and mid-size job shops.
一个配备2000×1000毫米夹具的3千瓦激光焊接单元，用于板材和管材组件。它可以穿透焊接1.5–3毫米搭接接头，处理0.8–4毫米不锈钢和镀锌板，厚度可达2毫米，并以更快、更可重复的工艺取代TIG工作站。
A 10 kW laser on the 4000×2000 mm bed for large-format panels in one piece. It cuts 6 mm carbon steel at about 9 m/min and handles 20 mm plate, giving structural, vehicle-body and enclosure manufacturers a single machine for full-width blanks with no part splitting.
The 12 kW LP-F3015 is built for heavy-gauge throughput: roughly 8 m/min on 6 mm carbon steel and 5 m/min on 10 mm, with 20 mm capacity at full power. It serves structural, agricultural and defence fabricators who cut thick plate without oxy-fuel consumables.