Technical specification
| Model | LP-F1503-3kW |
|---|---|
| Laser power | 3 kW |
| Cutting area | 3000×1500 mm |
| Max. sheet thickness | 10 mm Stahl / 6 mm Edelstahl / 8 mm Aluminium |
| Repeat positioning accuracy | ±0,02 mm |
| Max. positioning speed | 120 m/min |
Applicable materials
- Carbon Steel1–10 mm mild steel, approximately 12 m/min on 3 mm sheet
- Stainless Steel 304 / 3160.5–6 mm with nitrogen assist for an oxide-free cut face
- Aluminium 5052 / 60611–6 mm with clean edges and minimal dross
- Galvanized SheetUp to 4 mm with low coating burn-back
Key capabilities
The 3 kW source sustains roughly 12 m/min on 3 mm carbon steel and holds focus through long production runs, cutting mild steel up to 10 mm with clean, dross-free edges.
Two worktables exchange in seconds so operators never wait for the machine to finish unloading, and a 1500×750 mm table can be added for small blank nesting.
The cutting head reads material thickness, selects the correct nozzle and holds standoff height stable, with automatic retract when the head senses an obstruction.
Operators import DXF or STEP nests, set material and thickness, and the machine adjusts gas, focus and pierce time automatically for repeatable results across shifts.
Machine video
Get machine recommendation and pricing
Send the model with your inquiry — our engineers reply with cutting parameters, cycle time and delivery.
Related Cases
Eine 3 kW Laserschweißzelle mit einem 2000×1000 mm Schweißpodest für Blech- und Rohrbauteile. Sie schweißt 1,5–3 mm Überlappungen durch Lochschweißen, verarbeitet 0,8–4 mm Edelstahl- und galvanisierte Bleche bis zu 2 mm Dicke und ersetzt TIG-Stationen durch einen schnelleren und wiederholbareren Prozess.
Die 1,5 kW-Version der LP-F1500-Plattform für dünne Bleche, präzise Blanks und Kleinbauteile in großen Mengen. Sie schneidet dünnes Edelstahlblech mit mehr als 30 m/min, minimiert Wärmebeeinflussungszonen bei empfindlichen Werkstücken und verbraucht deutlich weniger Strom als vergleichbare Kohlendioxid-Anlagen.
The 12 kW LP-F3015 is built for heavy-gauge throughput: roughly 8 m/min on 6 mm carbon steel and 5 m/min on 10 mm, with 20 mm capacity at full power. It serves structural, agricultural and defence fabricators who cut thick plate without oxy-fuel consumables.
A 6 kW workhorse in a 3000×1500 mm bed, cutting 3 mm cold-rolled steel at about 30 m/min and mild steel up to 16 mm. This is the volume-production choice for automotive brackets and agricultural panels where a single shift must clear several tonnes of sheet.
A 3 kW laser welding cell with a 2000×1000 mm fixture for sheet and tube assemblies. It keyhole-welds 1.5–3 mm lap joints, handles 0.8–4 mm stainless and galvanized sheet up to 2 mm, and replaces TIG stations with a faster, more repeatable process.