Technical specification
| Model | LP-W2000-3kW |
|---|---|
| Laser power | 3 kW |
| Cutting area | 2000×1000 mm Schweißvorrichtung, erweiterbar auf 3000×1500 mm |
| Max. sheet thickness | 0,8–4 mm Edelstahl / 2 mm galvanisierte Blech / 1,5–3 mm Schweißnaht |
| Repeat positioning accuracy | ±0,1 mm |
| Max. positioning speed | 8 m/min Nahtfahrgeschwindigkeit |
Applicable materials
- Stainless Steel 304 / 3160.8–4 mm with narrow, low-porosity seams and minimal heat input
- Galvanized SheetUp to 2 mm with controlled zinc vaporisation and little coating damage
- Carbon Steel1.5–4 mm for butt and fillet welds with low spatter
- Aluminium 5052 / 60611.5–3 mm with controlled keyhole and reduced porosity
- Copper / BrassThin gauge joining with dedicated focus and shielding gas settings
Key capabilities
The 3 kW source switches between keyhole welding for thicker sections and conduction welding for thin sheet, giving one cell the flexibility of several TIG stations.
Wobble head movement widens the bead for fillet welds, and double-wire feed raises deposition rate on thicker joints, both available from the same head.
Capacitive contact and non-contact tracking follow the joint as the fixture moves, correcting path deviations and holding consistent penetration on formed parts.
Fixture presets are stored for each part family, so operators switch from one assembly to another in minutes without re-teaching the welding path.
Machine video
Get machine recommendation and pricing
Send the model with your inquiry — our engineers reply with cutting parameters, cycle time and delivery.
Related Cases
Ein 3 kW Faserlaser im Format 3000×1500 mm, der LP-F1503-3kW schneidet 3 mm dickes Kohlenstoffstahlblech mit etwa 12 m/min und erreicht bei 10 mm dickem Stahlblech die Nennleistung. Die pneumatische Palettenwechselvorrichtung, die automatische Düsesteuerung und das kompakte Gehäuse machen es zu einer robusten Produktionszelle für kleine und mittlere Jobshops.
Die 1,5 kW-Version der LP-F1500-Plattform für dünne Bleche, präzise Blanks und Kleinbauteile in großen Mengen. Sie schneidet dünnes Edelstahlblech mit mehr als 30 m/min, minimiert Wärmebeeinflussungszonen bei empfindlichen Werkstücken und verbraucht deutlich weniger Strom als vergleichbare Kohlendioxid-Anlagen.
A 3 kW laser welding cell with a 2000×1000 mm fixture for sheet and tube assemblies. It keyhole-welds 1.5–3 mm lap joints, handles 0.8–4 mm stainless and galvanized sheet up to 2 mm, and replaces TIG stations with a faster, more repeatable process.
The 12 kW LP-F3015 is built for heavy-gauge throughput: roughly 8 m/min on 6 mm carbon steel and 5 m/min on 10 mm, with 20 mm capacity at full power. It serves structural, agricultural and defence fabricators who cut thick plate without oxy-fuel consumables.
A 6 kW workhorse in a 3000×1500 mm bed, cutting 3 mm cold-rolled steel at about 30 m/min and mild steel up to 16 mm. This is the volume-production choice for automotive brackets and agricultural panels where a single shift must clear several tonnes of sheet.