Technical specification
| Model | LP-T320-4kW |
|---|---|
| Laser power | 4 kW |
| Cutting area | Φ20–Φ320 mm, standard bar length 6500 mm |
| Max. sheet thickness | 1–10 mm wall thickness (carbon steel, stainless, aluminium) |
| Repeat positioning accuracy | ±0.02 mm |
| Max. positioning speed | 120 m/min |
Applicable materials
- Carbon SteelΦ20–Φ320 mm round and shaped tube, 1–10 mm wall with minimal dross
- Stainless Steel 304 / 3160.8–6 mm wall with nitrogen assist and an oxide-free inner face
- Aluminium 5052 / 60611–8 mm wall with clean cut faces and no profile deformation
- Galvanized Steel1–4 mm coated tube with a low heat-affected zone
- Structural Hollow SectionsSHS, RHS, CHS, L and flat profiles with automatic centre detection
Key capabilities
One machine covers thin trim tube and heavy structural sections, handling round, square, rectangular, L-profile and flat bar with automatic profile detection.
The three-jaw chuck finds the tube centre and clamps without operator input, keeping the cut square on thin-wall and oval material.
An automatic feeding roller and length measurement system cut to order continuously, with an optional light-bar feed for thin tube that prevents scratching.
Dedicated tube cutting parameters and an optional piercing-assist function handle 10 mm carbon steel walls and thin 1 mm sections without deformation.
Machine video
Get machine recommendation and pricing
Send the model with your inquiry — our engineers reply with cutting parameters, cycle time and delivery.
相关案例
A 4 kW laser tube cutter for Φ20–Φ320 mm round, square, rectangular and open-section tube with 1–10 mm wall. The auto-centering chuck holds thin-wall profiles square, and the integrated feed and measurement system keeps batch tube production repeatable.
一款6 kW的高效设备，配备3000×1500 mm的工作台，可切割约30 m/min的3 mm冷轧钢和高达16 mm的低碳钢。这是汽车支架和农业面板批量生产的首选，单班次可处理数吨板材。
一个配备2000×1000毫米夹具的3千瓦激光焊接单元，用于板材和管材组件。它可以穿透焊接1.5–3毫米搭接接头，处理0.8–4毫米不锈钢和镀锌板，厚度可达2毫米，并以更快、更可重复的工艺取代TIG工作站。
The 20 kW LP-F6025 cuts 20 mm carbon steel and works across a 6000×2500 mm bed for heavy structural plate. Built for shipbuilding, defence and large machinery, it replaces oxy-fuel lines with a cleaner, faster and far more precise process.
A 10 kW laser on the 4000×2000 mm bed for large-format panels in one piece. It cuts 6 mm carbon steel at about 9 m/min and handles 20 mm plate, giving structural, vehicle-body and enclosure manufacturers a single machine for full-width blanks with no part splitting.