技术参数
| 型号 | LP-F3015-12kW |
|---|---|
| 激光功率 | 12 kW |
| 切割幅面 | 3000×1500 mm |
| 最大板材厚度 | 20 mm carbon steel / 16 mm stainless steel / 12 mm aluminium |
| 重复定位精度 | ±0.02 mm |
| 最大定位速度 | 169 m/min |
适用材料
- Carbon Steel1–20 mm, about 8 m/min on 6 mm and 5 m/min on 10 mm plate
- Stainless Steel 304 / 3160.5–16 mm with nitrogen assist for a clean cut face on thick sections
- Aluminium 5052 / 60611–12 mm with controlled dross and no material distortion
- Galvanized SheetUp to 6 mm with minimized coating burn-back
核心能力
Cutting feed and positioning are handled independently, so the head slows to the right speed on thick plate while the gantry still runs at 169 m/min between features.
Replacing oxy-fuel cutting, the 12 kW source cuts 20 mm carbon steel in a single pass with a narrow heat-affected zone and far lower operating cost per part.
The head senses material thickness and refocuses automatically, holding kerf width and edge angle constant as operators move between 3 mm sheet and 20 mm plate.
OEE, laser hours and alarm history are stored locally and available over the network, with LaserPeak service engineers able to connect remotely for fast diagnosis.
获取机型建议与报价
Send the model with your inquiry — our engineers reply with cutting parameters, cycle time and delivery.
相关案例
A 30 kW laser on the 6000×2500 mm platform for the thickest production plate. It cuts 25 mm carbon steel at about 2.5 m/min and 30 mm at roughly 1.5 m/min, letting fabricators consolidate large-plate work that previously went to waterjet or multiple oxy-fuel stations.
A 6 kW workhorse in a 3000×1500 mm bed, cutting 3 mm cold-rolled steel at about 30 m/min and mild steel up to 16 mm. This is the volume-production choice for automotive brackets and agricultural panels where a single shift must clear several tonnes of sheet.
The 40 kW flagship with an 8000×2500 mm bed, cutting 30 mm carbon steel in one pass and handling the largest structural blanks in the LaserPeak range. It targets shipbuilding, defence platforms and heavy equipment where very thick plate is cut as single pieces.
A 10 kW laser on the 4000×2000 mm bed for large-format panels in one piece. It cuts 6 mm carbon steel at about 9 m/min and handles 20 mm plate, giving structural, vehicle-body and enclosure manufacturers a single machine for full-width blanks with no part splitting.
The 20 kW LP-F6025 cuts 20 mm carbon steel and works across a 6000×2500 mm bed for heavy structural plate. Built for shipbuilding, defence and large machinery, it replaces oxy-fuel lines with a cleaner, faster and far more precise process.