技术参数
| 型号 | LP-F3015-6kW |
|---|---|
| 激光功率 | 6 kW |
| 切割幅面 | 3000×1500 mm |
| 最大板材厚度 | 16 mm carbon steel / 12 mm stainless steel / 10 mm aluminium |
| 重复定位精度 | ±0.02 mm |
| 最大定位速度 | 140 m/min |
适用材料
- Carbon Steel1–16 mm, approximately 30 m/min on 3 mm cold-rolled sheet
- Stainless Steel 304 / 3160.5–12 mm with nitrogen assist for a clean, oxide-free edge
- Aluminium 5052 / 60611–10 mm with minimal dross and no edge warping
- Galvanized SheetUp to 6 mm coated sheet with controlled coating burn-back
核心能力
The 6 kW source delivers production-grade throughput on thin sheet, letting one machine replace two 3 kW units and consolidating the cell footprint for line-side integration.
Dual 3000×1500 mm tables exchange in under ten seconds, so a single operator can load, nest and monitor production continuously without manual intervention.
The optional bright-surface package suppresses dross on stainless and aluminium, delivering mirror-bright edges that reduce grinding and weld rework.
A sealed extraction system and automatic gas switching keep the cut zone clear, protect optics and hold gas consumption close to actual process demand.
获取机型建议与报价
Send the model with your inquiry — our engineers reply with cutting parameters, cycle time and delivery.
相关案例
A 10 kW laser on the 4000×2000 mm bed for large-format panels in one piece. It cuts 6 mm carbon steel at about 9 m/min and handles 20 mm plate, giving structural, vehicle-body and enclosure manufacturers a single machine for full-width blanks with no part splitting.
The 4 kW LP-F4020 brings a 4000×2000 mm bed to shops that cut mostly thin and medium sheet. It cuts 3 mm carbon steel at about 15 m/min and 6 mm at roughly 7 m/min, with lower operating cost and simpler maintenance than higher-power installations.
A 3 kW fibre laser in a 3000×1500 mm format, the LP-F1503-3kW cuts 3 mm carbon steel at about 12 m/min and reaches 10 mm mild steel at rated power. Pneumatic pallet exchange, automatic nozzle control and a compact footprint make it a strong production cell for small and mid-size job shops.
The 12 kW LP-F3015 is built for heavy-gauge throughput: roughly 8 m/min on 6 mm carbon steel and 5 m/min on 10 mm, with 20 mm capacity at full power. It serves structural, agricultural and defence fabricators who cut thick plate without oxy-fuel consumables.
The 40 kW flagship with an 8000×2500 mm bed, cutting 30 mm carbon steel in one pass and handling the largest structural blanks in the LaserPeak range. It targets shipbuilding, defence platforms and heavy equipment where very thick plate is cut as single pieces.