Positioning
4 to 12 kW fibre laser sheet cutting engineered for continuous production of thick and thin sheet. High-power cutting dynamics, bright-surface capability and smart nozzle control push throughput up, while the 3×1.5 m and 4×2 m beds accept standard coil formats for automotive and agricultural machinery components.
| Laser Source | 4 / 6 / 10 / 12 kW IPG fibre resonator |
|---|---|
| Max Sheet Thickness | 20 mm carbon steel at 12 kW |
| Max Positioning Speed | 120–169 m/min |
| Automation | Automatic pallet changer, sheet follow-up and tube cutting module |
Machines in this series
- LP-F3015-6kW Fiber Laser Sheet Cutting Machine
- LP-F3015-12kW Fiber Laser Sheet Cutting Machine
- LP-F4020-10kW Fiber Laser Sheet Cutting Machine
- LP-F4020-4kW Fiber Laser Sheet Cutting Machine
产品中心
从 1 kW 板材切割到 40 kW 重载切割，从管材专机到激光焊接与自动化上下料，全部自有控制系统与切割工艺包。
A 3 kW fibre laser in a 3000×1500 mm format, the LP-F1503-3kW cuts 3 mm carbon steel at about 12 m/min and reaches 10 mm mild steel at rated power. Pneumatic pallet exchange, automatic nozzle control and a compact footprint make it a strong production cell for small and mid-size job shops.
- Power
- 3 kW
- Cutting area
- 3000×1500 mm
- Accuracy
- ±0.02 mm
A 3 kW laser welding cell with a 2000×1000 mm fixture for sheet and tube assemblies. It keyhole-welds 1.5–3 mm lap joints, handles 0.8–4 mm stainless and galvanized sheet up to 2 mm, and replaces TIG stations with a faster, more repeatable process.
- Power
- 3 kW
- Cutting area
- 2000×1000 mm welding fixture, expandable to 3000×1500 mm
- Accuracy
- ±0.1 mm
The 1.5 kW version of the LP-F1500 platform for thin sheet, precision blanks and high-volume small parts. It cuts thin stainless at more than 30 m/min, minimizes heat-affected zones on delicate workpieces and draws considerably less power than comparable carbon dioxide installations.
- Power
- 1.5 kW
- Cutting area
- 3000×1500 mm
- Accuracy
- ±0.02 mm
The 40 kW flagship with an 8000×2500 mm bed, cutting 30 mm carbon steel in one pass and handling the largest structural blanks in the LaserPeak range. It targets shipbuilding, defence platforms and heavy equipment where very thick plate is cut as single pieces.
- Power
- 40 kW
- Cutting area
- 8000×2500 mm
- Accuracy
- ±0.02 mm
A 30 kW laser on the 6000×2500 mm platform for the thickest production plate. It cuts 25 mm carbon steel at about 2.5 m/min and 30 mm at roughly 1.5 m/min, letting fabricators consolidate large-plate work that previously went to waterjet or multiple oxy-fuel stations.
- Power
- 30 kW
- Cutting area
- 6000×2500 mm
- Accuracy
- ±0.02 mm
The LP-A2000 automates sheet handling around LaserPeak fibre cutting machines, with interchangeable lifting tables, automatic pallet exchange, sheet following and robot loading arms. Unattended hours increase while operators move from handling heavy plate to programming and inspection.
- Cutting area
- Serves 1500×750 to 6000×2500 mm sheet platforms
- Accuracy
- ±0.05 mm sheet positioning