技术参数
| 型号 | LP-F6025-20kW |
|---|---|
| 激光功率 | 20 kW |
| 切割幅面 | 6000×2500 mm |
| 最大板材厚度 | 25 mm carbon steel / 20 mm stainless steel / 16 mm aluminium |
| 重复定位精度 | ±0.02 mm |
| 最大定位速度 | 120 m/min |
适用材料
- Carbon Steel2–25 mm, cutting 20 mm mild steel in a single pass
- Stainless Steel 304 / 3160.5–20 mm with nitrogen assist and bright cut faces
- Aluminium 5052 / 60611–16 mm with strong cutting stability on thick sections
- Galvanized SteelUp to 12 mm with controlled heat input and minimal coating damage
核心能力
The 20 kW source replaces thick-plate oxy-fuel cutting, cutting 20 mm carbon steel far faster with a narrow kerf and no edge grinding afterwards.
Six-metre bed width accepts full-length structural sections, simplifying nesting and reducing the number of weld joints in fabricated assemblies.
A welded steel gantry with high-rigidity drives and 1.5 g acceleration holds ±0.02 mm repeatability while moving heavy plate loads across the full bed.
Customers cut components closer to final size, removing a large share of downstream welding, grinding and distortion correction in heavy fabrication.
获取机型建议与报价
Send the model with your inquiry — our engineers reply with cutting parameters, cycle time and delivery.
相关案例
A 10 kW laser on the 4000×2000 mm bed for large-format panels in one piece. It cuts 6 mm carbon steel at about 9 m/min and handles 20 mm plate, giving structural, vehicle-body and enclosure manufacturers a single machine for full-width blanks with no part splitting.
The 40 kW flagship with an 8000×2500 mm bed, cutting 30 mm carbon steel in one pass and handling the largest structural blanks in the LaserPeak range. It targets shipbuilding, defence platforms and heavy equipment where very thick plate is cut as single pieces.
A 30 kW laser on the 6000×2500 mm platform for the thickest production plate. It cuts 25 mm carbon steel at about 2.5 m/min and 30 mm at roughly 1.5 m/min, letting fabricators consolidate large-plate work that previously went to waterjet or multiple oxy-fuel stations.
The 4 kW LP-F4020 brings a 4000×2000 mm bed to shops that cut mostly thin and medium sheet. It cuts 3 mm carbon steel at about 15 m/min and 6 mm at roughly 7 m/min, with lower operating cost and simpler maintenance than higher-power installations.
The 12 kW LP-F3015 is built for heavy-gauge throughput: roughly 8 m/min on 6 mm carbon steel and 5 m/min on 10 mm, with 20 mm capacity at full power. It serves structural, agricultural and defence fabricators who cut thick plate without oxy-fuel consumables.