Browse by category
Four product lines covering the metal fabrication tasks we are asked about most.
The LP-A series automates sheet handling around LaserPeak cutting machines. Interchangeable lifting tables, pallet exchange, sheet followers and robotic loading arms keep the laser busy through night shifts, with automatic height sensing, collision protection and MES or ERP integration for traceability on every part.
- Load Capacity
- 200 kg per lifting table, 500 kg pallet exchange
- Sheet Thickness
- 0.5–30 mm depending on platform configuration
- Compatible Beds
- 1500×750 to 6000×2500 mm sheet platforms
LaserPeak laser welding systems use a 1–6 kW fibre source for keyhole and conduction welding of thin sheet, tube and structural assemblies. Integrated seam tracking, wobble welding and adaptive process control deliver consistent penetration on galvanized sheet, lap joints and stainless steel, replacing TIG stations on high-mix production lines.
- Laser Power
- 1–6 kW fibre source, keyhole and conduction modes
- Weldable Thickness
- 0.8–4 mm stainless, up to 2 mm galvanized, 1.5–3 mm lap joints
- Fixture Area
- 2000×1000 mm standard, expandable
The LP-T series cuts round, square, rectangular and open-profile tube from Φ20 to Φ320 mm with an automatically self-centering three-jaw chuck. Designed for frame, chassis and railing manufacturers, the series combines a fibre laser source with a dedicated tube cutting head, automatic bar feeding and length measurement for continuous batch processing.
- Tube Diameter
- Φ20–Φ320 mm (round, square, rectangular, L-profile)
- Wall Thickness
- 1–10 mm carbon steel, stainless and aluminium
- Laser Power
- 3–6 kW fibre source
Fiber laser sheet cutting machines from LaserPeak deliver high-speed, low-distortion cutting on carbon steel, stainless steel and aluminium across working areas from 1500×750 mm to 8000×2500 mm. Resonator powers from 1.5 kW to 40 kW are paired with automatic pallet changers, intelligent nozzle control and automated material loading, raising throughput in job shops and high-volume production lines alike.
- Laser Source
- IPG / Raycus fibre resonator, 1.5–40 kW
- Working Area
- 1500×750 to 8000×2500 mm
- Repeat Accuracy
- ±0.02 mm
A 3 kW fibre laser in a 3000×1500 mm format, the LP-F1503-3kW cuts 3 mm carbon steel at about 12 m/min and reaches 10 mm mild steel at rated power. Pneumatic pallet exchange, automatic nozzle control and a compact footprint make it a strong production cell for small and mid-size job shops.
- Power
- 3 kW
- Cutting area
- 3000×1500 mm
- Accuracy
- ±0.02 mm
A 3 kW laser welding cell with a 2000×1000 mm fixture for sheet and tube assemblies. It keyhole-welds 1.5–3 mm lap joints, handles 0.8–4 mm stainless and galvanized sheet up to 2 mm, and replaces TIG stations with a faster, more repeatable process.
- Power
- 3 kW
- Cutting area
- 2000×1000 mm welding fixture, expandable to 3000×1500 mm
- Accuracy
- ±0.1 mm
The 1.5 kW version of the LP-F1500 platform for thin sheet, precision blanks and high-volume small parts. It cuts thin stainless at more than 30 m/min, minimizes heat-affected zones on delicate workpieces and draws considerably less power than comparable carbon dioxide installations.
- Power
- 1.5 kW
- Cutting area
- 3000×1500 mm
- Accuracy
- ±0.02 mm
The 40 kW flagship with an 8000×2500 mm bed, cutting 30 mm carbon steel in one pass and handling the largest structural blanks in the LaserPeak range. It targets shipbuilding, defence platforms and heavy equipment where very thick plate is cut as single pieces.
- Power
- 40 kW
- Cutting area
- 8000×2500 mm
- Accuracy
- ±0.02 mm
A 30 kW laser on the 6000×2500 mm platform for the thickest production plate. It cuts 25 mm carbon steel at about 2.5 m/min and 30 mm at roughly 1.5 m/min, letting fabricators consolidate large-plate work that previously went to waterjet or multiple oxy-fuel stations.
- Power
- 30 kW
- Cutting area
- 6000×2500 mm
- Accuracy
- ±0.02 mm
The LP-A2000 automates sheet handling around LaserPeak fibre cutting machines, with interchangeable lifting tables, automatic pallet exchange, sheet following and robot loading arms. Unattended hours increase while operators move from handling heavy plate to programming and inspection.
- Cutting area
- Serves 1500×750 to 6000×2500 mm sheet platforms
- Accuracy
- ±0.05 mm sheet positioning
A 10 kW laser on the 4000×2000 mm bed for large-format panels in one piece. It cuts 6 mm carbon steel at about 9 m/min and handles 20 mm plate, giving structural, vehicle-body and enclosure manufacturers a single machine for full-width blanks with no part splitting.
- Power
- 10 kW
- Cutting area
- 4000×2000 mm
- Accuracy
- ±0.02 mm
The 12 kW LP-F3015 is built for heavy-gauge throughput: roughly 8 m/min on 6 mm carbon steel and 5 m/min on 10 mm, with 20 mm capacity at full power. It serves structural, agricultural and defence fabricators who cut thick plate without oxy-fuel consumables.
- Power
- 12 kW
- Cutting area
- 3000×1500 mm
- Accuracy
- ±0.02 mm
The 20 kW LP-F6025 cuts 20 mm carbon steel and works across a 6000×2500 mm bed for heavy structural plate. Built for shipbuilding, defence and large machinery, it replaces oxy-fuel lines with a cleaner, faster and far more precise process.
- Power
- 20 kW
- Cutting area
- 6000×2500 mm
- Accuracy
- ±0.02 mm
A 6 kW workhorse in a 3000×1500 mm bed, cutting 3 mm cold-rolled steel at about 30 m/min and mild steel up to 16 mm. This is the volume-production choice for automotive brackets and agricultural panels where a single shift must clear several tonnes of sheet.
- Power
- 6 kW
- Cutting area
- 3000×1500 mm
- Accuracy
- ±0.02 mm
The 4 kW LP-F4020 brings a 4000×2000 mm bed to shops that cut mostly thin and medium sheet. It cuts 3 mm carbon steel at about 15 m/min and 6 mm at roughly 7 m/min, with lower operating cost and simpler maintenance than higher-power installations.
- Power
- 4 kW
- Cutting area
- 4000×2000 mm
- Accuracy
- ±0.02 mm
A 4 kW laser tube cutter for Φ20–Φ320 mm round, square, rectangular and open-section tube with 1–10 mm wall. The auto-centering chuck holds thin-wall profiles square, and the integrated feed and measurement system keeps batch tube production repeatable.
- Power
- 4 kW
- Cutting area
- Φ20–Φ320 mm, standard bar length 6500 mm
- Accuracy
- ±0.02 mm
Not sure which machine fits your part?
Send us the material, the thickness and the annual tonnage — our application engineers reply with a machine and a process package.